Interior doors
Bedroom, bathroom, hallway, closet, and pantry doors hung with consistent reveals, quiet operation, and hardware that lines up room to room.
← Door installation services
Cave Creek · Door Installation
Door installation in Cave Creek by an owner-operated finish carpenter.
Cave Creek is full of custom and desert-style homes where entries take real sun and wind, and doors are often larger or heavier than a standard build. Retro Fit Installation LLC installs interior, solid-core, and front doors as finish carpentry, so the slab, jamb, hardware, and casing line up cleanly and hold up to desert exposure.
What Gets Installed
Door installation for Cave Creek homes and remodels.
From a single front door to a whole-house interior package on a remodel, each door is treated as finish work — measured to the opening, set true, and tied cleanly into the surrounding casing and hardware.
Solid-core & single-panel
Heavier solid-core and single-panel slabs are set with proper hinge backing and screw purchase so they hang true and don't sag over time.
Front & exterior doors
Entry and front doors are fit for plumb, even reveals, weather-seal contact, and a latch and deadbolt that engage cleanly against Cave Creek sun and wind exposure.
Prehung & slab conditions
Prehung units are shimmed square in the rough opening; slabs into existing jambs get hinge and bore prep, mortising, and edge easing to fit.
Closet & bypass doors
Bypass, bifold, and closet openings get track layout, guide alignment, and panel adjustment so they run smooth and sit flush.
Casing, jamb & hardware
Jamb detailing, straight casing, hinges, levers, locksets, stops, and pulls installed with tight miters and consistent layout.
Done Right
What a proper door install actually includes.
The difference between a door that was hung and a door that was installed well shows up in the details — the parts you feel every day without naming them.
Even reveal margins
Consistent gaps down the hinge side, latch side, and head so the door reads straight and closes without rubbing.
Plumb, level, square jamb
The jamb is shimmed and fastened plumb and level so the slab holds its position instead of drifting open or swinging shut.
Hinge & strike alignment
Hinges mortised to depth and strikes set so the latch catches on the first try and the door sits flush to the stop.
Protected finishes
Floors, casing, and adjacent surfaces are covered before cutting or fitting, so new finishes stay clean through the install.
Smooth swing & latch
The door is cycled and dialed in so it swings freely, holds where you leave it, and latches and locks without force.
Clean casing tie-in
Casing and trim are returned to the jamb with tight joints so the finished opening looks intentional, not patched.
Local to Cave Creek
Custom desert homes and hard-exposed entries.
Cave Creek is largely custom homes on open desert lots, where front and courtyard entries take the full brunt of sun, wind-driven dust, and big day-to-night temperature swings. Heavier statement doors and exposed thresholds have to be set precisely so they keep sealing and operating cleanly — every install backed by a 2-year workmanship warranty.
Heavy custom entry doors
Larger and heavier custom slabs are set with solid hinge backing and careful fitting so they swing true, hold where you leave them, and stay aligned in the opening season after season.
Threshold, sweep & hardware fit
On exposed entries the threshold, door sweep, weather-seal contact, and reveal margins are dialed in so the door closes tight against dust and sun — solid fit and adjustment, not a waterproofing guarantee.
Finish-carpentry detail
Casing, jambs, and hardware are finished cleanly so a new or replaced door on a Cave Creek custom home reads as part of the architecture, not an add-on.
How It Works
A straightforward door installation process.
Every install follows the same order so the opening is right before the door goes in and your finishes stay protected throughout.
1 · Review the opening
The rough opening or existing jamb is measured and checked for square, plumb, and size against the door being installed.
2 · Confirm door & swing
Door type, hardware, hinge side, and swing direction are confirmed so the finished door works the way the room needs.
3 · Protect finishes
Floors, casing, and nearby surfaces are covered before any cutting, mortising, or fitting begins.
4 · Install & adjust
The jamb is set plumb and level, the slab hung, hinges and strikes aligned, and casing and hardware fit for even reveals.
5 · Final operation check
The door is cycled and the swing, latch, lock, and margins are verified before the job is called done.
Reviews
Rated 5.0 on Google.
Several of these reviews are from door installation and front-door work — the exact scope this page is about.
-
Devin Nelson does amazing work, great craftsmanship, diligent through every step of the process! Has great communication and I would highly recommend using him for any upcoming projects you might have!
Chase WilliamsGoogle review -
Retrofit has done various projects in my condo from installing new doors to replacing and custom fitting vanities… their professionalism is unmatched and the job always exceeds expectations. Pricing is fair and they are always transparent.
Amber AGoogle review -
Devin went above and beyond with the work he did on my front door. He didn’t rush through the job and you could tell he takes pride in his work. I couldn’t believe it was the same door. Highly recommend him!
Alice JenkinsGoogle review
Service Area
Door installation in Cave Creek and nearby.
Retro Fit Installation LLC is a Tempe-based door installer serving Cave Creek along with Carefree, North Scottsdale, Scottsdale, Phoenix, and Paradise Valley. Working on more than doors? These finish carpentry pages are closely related.
Related services
Door repair in Cave Creek
Interior & exterior door installation
Casing & trim
Finish carpentry in Cave Creek
More Cave Creek work
For builders & contractors
Need a finish-carpentry sub for a Cave Creek door and trim package or punch list? See builder & contractor rates.
FAQ
Door installation in Cave Creek — common questions.
How much does door installation cost in Cave Creek?
Door installation is quoted after reviewing the opening, the door type, the hardware, and how many doors are involved. A single interior slab is a smaller job than a full interior door package or a front-door installation with casing and hardware. Send photos and the door details through the contact form and Devin follows up with an estimate.
Do you install front and exterior doors in Cave Creek?
Yes. Front and entry doors are set plumb and level with even reveals, proper weather-seal contact, threshold fit, and a latch and deadbolt that engage cleanly, which matters for the sun and wind exposure on Cave Creek desert lots. Both prehung units and slabs into existing jambs are handled.
Do you work on custom and desert homes in Cave Creek?
Yes. Cave Creek has a lot of custom and desert-style homes with larger or heavier doors and exposed entries. Each opening is measured and the door is set as finish carpentry so reveals stay even and hardware operates cleanly.
Can you install a door I already purchased?
Yes. Customer-provided slabs and prehung units are welcome. Bring the door and it is fit, set, and adjusted to the opening so the swing, latch, and reveals come out clean. If you have not bought yet, the estimate is a good time to confirm sizing, swing direction, and hardware.
Are you licensed, bonded, and insured?
Yes. Retro Fit Installation LLC is a licensed Arizona finish carpenter, AZ ROC R-60 #346885, bonded and insured. Work is owner-performed by Devin Nelson, so the person you talk to is the person doing the install, and every install is backed by a 2-year workmanship warranty.
How do I get a door installation estimate in Cave Creek?
Call or text 928-699-2638, or use the contact form with photos, the door type, the quantity, and any material details you have. Devin reviews each request personally and responds with next steps and an estimate.
Need a door installed in Cave Creek?
Send photos, the door type, the quantity, and any material details you have. Devin will review the scope and respond with next steps and an estimate.
Request a Free Estimate