Interior doors
Bedroom, bathroom, hallway, closet, and pantry doors hung with consistent reveals, quiet operation, and hardware that lines up room to room.
← Door installation services
Phoenix · Door Installation
Door installation in Phoenix by an owner-operated finish carpenter.
Phoenix homes run the full range — historic-district bungalows, mid-century ranches, and new production builds — and each opening behaves a little differently. Retro Fit Installation LLC installs interior, solid-core, and front doors as finish carpentry, so the slab, jamb, hardware, and casing line up and stay that way through the heat and monsoon swings.
What Gets Installed
Door installation for Phoenix homes and remodels.
From a single front door to a whole-house interior package on a remodel, each door is treated as finish work — measured to the opening, set true, and tied cleanly into the surrounding casing and hardware.
Solid-core & single-panel
Heavier solid-core and single-panel slabs are set with proper hinge backing and screw purchase so they hang true and don't sag over time.
Front & exterior doors
Entry and front doors are fit for plumb, even reveals, weather-seal contact, and a latch and deadbolt that engage cleanly against Phoenix sun and monsoon exposure.
Prehung & slab conditions
Prehung units are shimmed square in the rough opening; slabs into existing jambs get hinge and bore prep, mortising, and edge easing to fit.
Closet & bypass doors
Bypass, bifold, and closet openings get track layout, guide alignment, and panel adjustment so they run smooth and sit flush.
Casing, jamb & hardware
Jamb detailing, straight casing, hinges, levers, locksets, stops, and pulls installed with tight miters and consistent layout.
Done Right
What a proper door install actually includes.
The difference between a door that was hung and a door that was installed well shows up in the details — the parts you feel every day without naming them.
Even reveal margins
Consistent gaps down the hinge side, latch side, and head so the door reads straight and closes without rubbing.
Plumb, level, square jamb
The jamb is shimmed and fastened plumb and level so the slab holds its position instead of drifting open or swinging shut.
Hinge & strike alignment
Hinges mortised to depth and strikes set so the latch catches on the first try and the door sits flush to the stop.
Protected finishes
Floors, casing, and adjacent surfaces are covered before cutting or fitting, so new finishes stay clean through the install.
Smooth swing & latch
The door is cycled and dialed in so it swings freely, holds where you leave it, and latches and locks without force.
Clean casing tie-in
Casing and trim are returned to the jamb with tight joints so the finished opening looks intentional, not patched.
Phoenix Homes
A century of Phoenix housing, each set a little differently.
Phoenix runs from 1920s Encanto and Willo bungalows through 1950s and ’60s block ranches across the central corridor to infill townhomes and new tract construction on the edges. A slab that drops cleanly into a fresh rough opening rarely fits an older one without work, so the install is matched to what’s actually in the wall. Every install is backed by a 2-year workmanship warranty.
Older & historic homes
Central-Phoenix openings have usually settled, been painted over many times, or been remodeled off-square. The jamb is set to the real opening so the door swings true and the casing still reads straight.
Rentals & quick turns
For landlords and property managers, worn interior and closet doors are swapped and re-hung on a schedule that fits a turnover, with hardware that latches cleanly for the next tenant.
Infill & new construction
On newer central and north Phoenix builds, whole-house interior packages go in with matched reveals and consistent lever height across every opening in the home.
How It Works
A straightforward door installation process.
Every install follows the same order so the opening is right before the door goes in and your finishes stay protected throughout.
1 · Review the opening
The rough opening or existing jamb is measured and checked for square, plumb, and size against the door being installed.
2 · Confirm door & swing
Door type, hardware, hinge side, and swing direction are confirmed so the finished door works the way the room needs.
3 · Protect finishes
Floors, casing, and nearby surfaces are covered before any cutting, mortising, or fitting begins.
4 · Install & adjust
The jamb is set plumb and level, the slab hung, hinges and strikes aligned, and casing and hardware fit for even reveals.
5 · Final operation check
The door is cycled and the swing, latch, lock, and margins are verified before the job is called done.
Reviews
Rated 5.0 on Google.
Several of these reviews are from door installation and front-door work — the exact scope this page is about.
-
Devin Nelson does amazing work, great craftsmanship, diligent through every step of the process! Has great communication and I would highly recommend using him for any upcoming projects you might have!
Chase WilliamsGoogle review -
Retrofit has done various projects in my condo from installing new doors to replacing and custom fitting vanities… their professionalism is unmatched and the job always exceeds expectations. Pricing is fair and they are always transparent.
Amber AGoogle review -
Devin went above and beyond with the work he did on my front door. He didn’t rush through the job and you could tell he takes pride in his work. I couldn’t believe it was the same door. Highly recommend him!
Alice JenkinsGoogle review
Service Area
Door installation in Phoenix and nearby.
Retro Fit Installation LLC is a Tempe-based door installer serving Phoenix and Ahwatukee along with Tempe, Scottsdale, Paradise Valley, Mesa, Gilbert, and the wider East Valley. Working on more than doors? These finish carpentry pages are closely related.
Related services
Door repair in Phoenix
Interior & exterior door installation
Casing & trim
Finish carpentry in Phoenix
More Phoenix work
For builders & contractors
Need a finish-carpentry sub for a Phoenix door and trim package or punch list? See builder & contractor rates.
FAQ
Door installation in Phoenix — common questions.
How much does door installation cost in Phoenix?
Every project is quoted after looking at the opening, the door type, the hardware, and how many doors are involved. A single interior slab in a central-Phoenix home is a smaller job than a whole-house package or a front-door install with new casing and hardware. Send photos and the details and Devin follows up with an estimate.
Do you install doors in older and historic Phoenix homes?
Yes. Bungalows in Encanto and Willo and the block ranches through central Phoenix have often settled and been remodeled, so openings are rarely square. The jamb is shimmed and set to the real opening so the door operates correctly and the trim still looks intentional, instead of forcing a stock unit into a moved frame.
Do you install front and exterior doors in Phoenix?
Yes. Front and entry doors are set plumb and level with even reveals, solid weather-seal contact, a threshold that fits, and a latch and deadbolt that engage on the first try — which matters against Phoenix sun and monsoon-season swings. Both prehung units and slabs into existing jambs are handled.
Can you handle a rental turn or several doors at once?
Yes. For landlords and property managers, multiple interior, closet, and entry doors can be swapped or re-hung in one visit and scheduled around a turnover, so the unit is ready for the next tenant with hardware that latches cleanly.
Are you licensed, bonded, and insured?
Yes. Retro Fit Installation LLC is a licensed Arizona finish carpenter, AZ ROC R-60 #346885, bonded and insured, and installs are backed by a 2-year workmanship warranty. Work is owner-performed by Devin Nelson, so the person you talk to is the person doing the install.
How do I get a door installation estimate in Phoenix?
Call or text 928-699-2638, or use the contact form with photos, the door type, the quantity, and any material details. Devin reviews each Phoenix request personally and responds with next steps and an estimate.
Need a door installed in Phoenix?
Send photos, the door type, the quantity, and any material details you have. Devin will review the scope and respond with next steps and an estimate.
Request a Free Estimate