Interior doors
Bedroom, bathroom, hallway, closet, and pantry doors hung with consistent reveals, quiet operation, and hardware that lines up room to room.
← Door installation services
Chandler · Door Installation
Door installation in Chandler by an owner-operated finish carpenter.
Chandler runs from established neighborhoods to newer production and custom builds, and door work here is often part of a remodel or an upgrade. Retro Fit Installation LLC installs interior, solid-core, and front doors as finish carpentry, so the slab, jamb, hardware, and casing line up cleanly — backed by clear, reliable communication from start to finish.
What Gets Installed
Door installation for Chandler homes and remodels.
From a single front door to a whole-house interior package on a remodel, each door is treated as finish work — measured to the opening, set true, and tied cleanly into the surrounding casing and hardware.
Solid-core & single-panel
Heavier solid-core and single-panel slabs are set with proper hinge backing and screw purchase so they hang true and don't sag over time.
Front & exterior doors
Entry and front doors are fit for plumb, even reveals, weather-seal contact, and a latch and deadbolt that engage cleanly against Chandler sun and monsoon exposure.
Prehung & slab conditions
Prehung units are shimmed square in the rough opening; slabs into existing jambs get hinge and bore prep, mortising, and edge easing to fit.
Closet & bypass doors
Bypass, bifold, and closet openings get track layout, guide alignment, and panel adjustment so they run smooth and sit flush.
Casing, jamb & hardware
Jamb detailing, straight casing, hinges, levers, locksets, stops, and pulls installed with tight miters and consistent layout.
Done Right
What a proper door install actually includes.
The difference between a door that was hung and a door that was installed well shows up in the details — the parts you feel every day without naming them.
Even reveal margins
Consistent gaps down the hinge side, latch side, and head so the door reads straight and closes without rubbing.
Plumb, level, square jamb
The jamb is shimmed and fastened plumb and level so the slab holds its position instead of drifting open or swinging shut.
Hinge & strike alignment
Hinges mortised to depth and strikes set so the latch catches on the first try and the door sits flush to the stop.
Protected finishes
Floors, casing, and adjacent surfaces are covered before cutting or fitting, so new finishes stay clean through the install.
Smooth swing & latch
The door is cycled and dialed in so it swings freely, holds where you leave it, and latches and locks without force.
Clean casing tie-in
Casing and trim are returned to the jamb with tight joints so the finished opening looks intentional, not patched.
Local to Chandler
Newer subdivisions, older pockets, and work around occupied homes.
Chandler runs from established neighborhoods near downtown and the Ocotillo area to newer master-planned subdivisions, and much of the door work lands mid-remodel in a house people are still living in. That means clean scheduling, tidy work areas, and front-door and hardware upgrades that get dialed in right the first time — all backed by a 2-year workmanship warranty.
Front & exterior upgrades
Swapping a dated front door for a new entry unit, set plumb with even reveals, solid weather-seal contact, and a latch and deadbolt that engage cleanly against Chandler sun and monsoon exposure.
Hardware alignment
Levers, locksets, hinges, and strikes set to consistent height and depth so every door in the home matches and each one catches on the first try instead of needing a shoulder.
Work around occupied homes
Most Chandler jobs happen while the family is home, so openings are protected, dust is contained, and doors are put back in service the same day wherever the schedule allows.
How It Works
A straightforward door installation process.
Every install follows the same order so the opening is right before the door goes in and your finishes stay protected throughout.
1 · Review the opening
The rough opening or existing jamb is measured and checked for square, plumb, and size against the door being installed.
2 · Confirm door & swing
Door type, hardware, hinge side, and swing direction are confirmed so the finished door works the way the room needs.
3 · Protect finishes
Floors, casing, and nearby surfaces are covered before any cutting, mortising, or fitting begins.
4 · Install & adjust
The jamb is set plumb and level, the slab hung, hinges and strikes aligned, and casing and hardware fit for even reveals.
5 · Final operation check
The door is cycled and the swing, latch, lock, and margins are verified before the job is called done.
Reviews
Rated 5.0 on Google.
Several of these reviews are from door installation and front-door work — the exact scope this page is about.
-
Devin Nelson does amazing work, great craftsmanship, diligent through every step of the process! Has great communication and I would highly recommend using him for any upcoming projects you might have!
Chase WilliamsGoogle review -
Retrofit has done various projects in my condo from installing new doors to replacing and custom fitting vanities… their professionalism is unmatched and the job always exceeds expectations. Pricing is fair and they are always transparent.
Amber AGoogle review -
Devin went above and beyond with the work he did on my front door. He didn’t rush through the job and you could tell he takes pride in his work. I couldn’t believe it was the same door. Highly recommend him!
Alice JenkinsGoogle review
Service Area
Door installation in Chandler and nearby.
Retro Fit Installation LLC is a Tempe-based door installer serving Chandler along with Gilbert, Mesa, Queen Creek, Tempe, and the wider East Valley. Working on more than doors? These finish carpentry pages are closely related.
Related services
Door repair in Chandler
Interior & exterior door installation
Casing & trim
Finish carpentry in Chandler
More Chandler work
Baseboard installation in Chandler
Door installation in Gilbert
Door installation in Mesa
For builders & contractors
Need a finish-carpentry sub for a Chandler door and trim package or punch list? See builder & contractor rates.
FAQ
Door installation in Chandler — common questions.
How much does door installation cost in Chandler?
Door installation is quoted after reviewing the opening, the door type, the hardware, and how many doors are involved. A single interior slab is a smaller job than a full interior door package or a front-door installation with casing and hardware. Send photos and the door details through the contact form and Devin follows up with an estimate.
Do you install front and exterior doors in Chandler?
Yes. Front and entry doors are set plumb and level with even reveals, proper weather-seal contact, threshold fit, and a latch and deadbolt that engage cleanly, which matters in Chandler heat and monsoon exposure. Both prehung units and slabs into existing jambs are handled.
Do you install doors in Chandler remodels and production homes?
Yes. Both remodels and newer production and custom homes are common in Chandler. Doors are installed with consistent reveals and hardware layout across every opening, whether it is a single remodel room or a whole-house package.
Can you install a door I already purchased?
Yes. Customer-provided slabs and prehung units are welcome. Bring the door and it is fit, set, and adjusted to the opening so the swing, latch, and reveals come out clean. If you have not bought yet, the estimate is a good time to confirm sizing, swing direction, and hardware.
Are you licensed, bonded, and insured?
Yes. Retro Fit Installation LLC is a licensed Arizona finish carpenter, AZ ROC R-60 #346885, bonded and insured. Work is owner-performed by Devin Nelson, so the person you talk to is the person doing the install, and every install is backed by a 2-year workmanship warranty.
How do I get a door installation estimate in Chandler?
Call or text 928-699-2638, or use the contact form with photos, the door type, the quantity, and any material details you have. Devin reviews each request personally and responds with next steps and an estimate.
Need a door installed in Chandler?
Send photos, the door type, the quantity, and any material details you have. Devin will review the scope and respond with next steps and an estimate.
Request a Free Estimate