Front-door & entry alignment
Entry doors that stick, drag, or won't seal are corrected at the hinges, threshold, and weatherstrip so the door closes clean and locks without a fight.
← Door repair services
Chandler · Door Repair
Door repair in Chandler by an owner-operated finish carpenter.
Chandler is a mix of newer subdivisions and established older pockets, and a lot of the door work happens in homes that are lived in or mid-remodel. Retro Fit Installation LLC repairs interior and exterior doors as finish carpentry — front doors that stick or won't seal, handlesets and strikes out of alignment, sagging and rubbing slabs — working per opening so your finishes stay protected and the household or other trades can keep moving.
Problems Handled
Common Chandler door problems, corrected at the source.
In Chandler the calls range from front doors and hardware on newer subdivisions to worn and settled openings in older neighborhoods, plus punch-list corrections on remodels. Each is diagnosed before anything is adjusted.
Handleset & strike alignment
Handlesets, deadbolts, and strikes that are out of line are realigned so the latch and bolt engage smoothly instead of catching or missing.
Rubbing & binding doors
Slabs that drag on the jamb, catch on the floor, or stick are corrected by resetting hinges, shimming, easing the edge, and squaring the reveal.
Loose or sagging hinges
Stripped screws, worn hinges, and sagging slabs are re-anchored with proper backing and hardware so the door hangs and swings true.
Remodel & punch-list corrections
Door and trim corrections for Chandler remodels and homeowners preparing for a walkthrough, finished cleanly around the surrounding work.
Work around occupied homes
In lived-in Chandler homes, floors and finishes are protected, the area is kept tidy, and doors are handled per opening so the household keeps moving.
Repair or Replace
When a repair is the right call — and when it isn't.
A repair should solve the problem without leaving the opening looking patched. Whether it's a newer Chandler build or an older home mid-remodel, the goal is honest advice about which path gives the cleaner, longer-lasting result.
Repair usually makes sense when
The slab is straight and sound, the jamb is workable, and the issue is alignment, hinges, hardware, a strike, a threshold, or loose trim. These are adjustments and finish corrections — not a reason to buy a new door.
Replacement may be cleaner when
The slab is warped, cracked, water-damaged, or badly out of size for the opening, or a previous install was fit poorly enough that adjusting it would only hide the problem. In those cases new-door options are laid out plainly.
Need a new or replacement door instead? See door installation in Chandler or the full door installation page.
How It Works
A straightforward door repair process.
Every visit follows the same order so nothing gets missed and your finishes are protected while the work is done.
1 · Inspect
The reveal, gaps, hinges, jamb, strike, threshold, and hardware are checked to find what's actually causing the issue.
2 · Explain options
You get a plain explanation of what the door needs, whether repair or replacement is the better path, and what it involves.
3 · Protect finishes
Floors, casing, and surrounding surfaces are protected before any adjustment, planing, or hardware work begins.
4 · Repair & adjust
Hinges, shims, strikes, thresholds, trim, and hardware are corrected so the door sits square and operates cleanly.
5 · Test operation
The door is cycled and the latch, swing, margins, and close are verified before the job is called done.
Reviews
Rated 5.0 on Google.
Several of these reviews are from front-door and door-fit work — the exact repairs this page is about.
-
Devin went above and beyond with the work he did on my front door. He didn’t rush through the job and you could tell he takes pride in his work. I couldn’t believe it was the same door. Highly recommend him!
Alice JenkinsGoogle review -
Devin Nelson does amazing work, great craftsmanship, diligent through every step of the process! Has great communication and I would highly recommend using him for any upcoming projects you might have!
Chase WilliamsGoogle review -
Retrofit has done various projects in my condo from installing new doors to replacing and custom fitting vanities… their professionalism is unmatched and the job always exceeds expectations. Pricing is fair and they are always transparent.
Amber AGoogle review
Service Area
Door repair in Chandler and nearby.
Serving Chandler along with Gilbert, Tempe, Mesa, Sun Lakes, and Ahwatukee. Doing more than a door repair? These finish carpentry pages are closely related.
Related services
Door installation in Chandler
Interior & exterior door installation
Casing & trim
Finish carpentry in Chandler
Door repair nearby
Gilbert · Tempe · Mesa · Queen Creek · Phoenix · Scottsdale
For builders
Handling finish-carpentry punch-list doors on a Chandler project? See builder & contractor rates.
FAQ
Door repair in Chandler — common questions.
How much does door repair cost in Chandler?
Most Chandler door repairs are quoted after a look at the door, jamb, hinges, and hardware. A simple adjustment is a smaller job than hardware replacement or jamb and casing work. Send photos and a short description through the contact form and Devin follows up with next steps and an estimate.
Can you work around an occupied Chandler home or a remodel in progress?
Yes. Much of the Chandler work is in lived-in homes and active remodels, so finishes and floors are protected, the work area is kept tidy, and doors are handled per opening so the household or other trades can keep moving. Cleanup happens before the visit is finished.
Can a rubbing or sticking door be fixed without replacing it?
Often, yes. Many rubbing or sticking doors are corrected by adjusting or shimming hinges, realigning the strike, easing the slab, or squaring the jamb. Replacement is usually only the better call when the slab is warped or damaged, or when the opening needs a cleaner finished result.
Do you handle front-door and hardware alignment on newer Chandler homes?
Yes. On newer Chandler subdivisions the common calls are front doors that stick or don’t seal, and handlesets, deadbolts, and strikes that are out of alignment. The slab, hinges, threshold, and hardware are adjusted so the entry closes, latches, and locks the way it should.
Are you licensed and insured, and is the work warrantied?
Yes. Retro Fit Installation LLC is a licensed Arizona finish carpenter, AZ ROC R-60 #346885, bonded and insured. Work is owner-performed by Devin Nelson and backed by a 2-year workmanship warranty on Retro Fit installation labor (excluding materials, manufacturer defects, customer-supplied products, movement, water, misuse, or work later modified by others).
How do I get a door repair estimate in Chandler?
Call or text 928-699-2638, or use the contact form with a few photos and a note on what the door is doing. Devin reviews each request personally and responds with next steps.
Need a door repaired in Chandler?
Send a couple of photos and a note on what the door is doing. Devin will review it and respond with next steps and an estimate.
Request a Free Estimate