Worn hinges & stripped screws
Hinges that have loosened and screws that spin free under years of use are re-anchored with proper backing so the door stops sagging and swings true.
← Door repair services
Gilbert · Door Repair
Door repair in Gilbert by an owner-operated finish carpenter.
Most Gilbert door calls come from homes that are simply well lived in — kids' rooms, bathrooms, and laundry doors that open and close all day until hinges loosen, hardware wears out, and the latch stops catching. Retro Fit Installation LLC repairs interior and exterior doors as finish carpentry, resetting the hinges, hardware, strike, and trim so the door operates cleanly and looks right, not just patched.
Problems Handled
Common Gilbert door problems, corrected at the source.
In Gilbert's family homes the usual culprits are years of daily use: loosened hinges, stripped screws, worn levers and locksets, and strikes that have drifted out of alignment. Each is diagnosed before anything is adjusted so the fix actually lasts.
Rubbing & binding doors
Slabs that drag on the jamb, catch on the floor, or stick are corrected by resetting hinges, shimming, easing the edge, and squaring the reveal.
Doors that won't latch
Latches that miss the strike, pop open, or need a shoulder to close are fixed by aligning the strike plate, adjusting hinges, and dialing in the gap.
Worn or tired hardware
Levers, locksets, hinges, and strike plates worn out from heavy household use are replaced with clean layout and proper fastening.
Threshold & weatherstrip
On exterior doors, thresholds and weather seals are adjusted for even contact and a clean close against Gilbert heat and monsoon exposure — within a finish carpentry scope.
Whole-house door tune-ups
Several sticking, sagging, or non-latching doors and worn hardware handled in a single Gilbert visit so the whole home operates cleanly.
Repair or Replace
When a repair is the right call — and when it isn't.
A repair should solve the problem without leaving the opening looking patched. In a busy Gilbert household the goal is honest advice about which path gives the cleaner, longer-lasting result.
Repair usually makes sense when
The slab is straight and sound, the jamb is workable, and the issue is alignment, hinges, hardware, a strike, a threshold, or loose trim. These are adjustments and finish corrections — not a reason to buy a new door.
Replacement may be cleaner when
The slab is warped, cracked, water-damaged, or badly out of size for the opening, or a previous install was fit poorly enough that adjusting it would only hide the problem. In those cases new-door options are laid out plainly.
Need a new or replacement door instead? See door installation in Gilbert or the full door installation page.
How It Works
A straightforward door repair process.
Every visit follows the same order so nothing gets missed and your finishes are protected while the work is done.
1 · Inspect
The reveal, gaps, hinges, jamb, strike, threshold, and hardware are checked to find what's actually causing the issue.
2 · Explain options
You get a plain explanation of what the door needs, whether repair or replacement is the better path, and what it involves.
3 · Protect finishes
Floors, casing, and surrounding surfaces are protected before any adjustment, planing, or hardware work begins.
4 · Repair & adjust
Hinges, shims, strikes, thresholds, trim, and hardware are corrected so the door sits square and operates cleanly.
5 · Test operation
The door is cycled and the latch, swing, margins, and close are verified before the job is called done.
Reviews
Rated 5.0 on Google.
Several of these reviews are from front-door and door-fit work — the exact repairs this page is about.
-
Devin went above and beyond with the work he did on my front door. He didn’t rush through the job and you could tell he takes pride in his work. I couldn’t believe it was the same door. Highly recommend him!
Alice JenkinsGoogle review -
Retrofit has done various projects in my condo from installing new doors to replacing and custom fitting vanities… their professionalism is unmatched and the job always exceeds expectations. Pricing is fair and they are always transparent.
Amber AGoogle review -
Devin Nelson does amazing work, great craftsmanship, diligent through every step of the process! Has great communication and I would highly recommend using him for any upcoming projects you might have!
Chase WilliamsGoogle review
Service Area
Door repair in Gilbert and nearby.
Serving Gilbert along with Chandler, Mesa, Queen Creek, and Tempe. Doing more than a door repair? These finish carpentry pages are closely related.
Related services
Door installation in Gilbert
Interior & exterior door installation
Casing & trim
Finish carpentry in Gilbert
Door repair nearby
Chandler · Mesa · Queen Creek · Tempe · Phoenix · Scottsdale
For builders
Handling finish-carpentry punch-list doors on a Gilbert project? See builder & contractor rates.
FAQ
Door repair in Gilbert — common questions.
How much does door repair cost in Gilbert?
Most Gilbert door repairs are quoted after a look at the door, jamb, hinges, and hardware. A simple hinge or strike adjustment is a smaller job than replacing worn hardware or working the jamb and casing. Send photos and a short description through the contact form and Devin follows up with next steps and an estimate.
The doors in my Gilbert home get heavy daily use — can worn hinges and hardware be fixed?
Yes. In busy Gilbert family homes, kids’ room, bathroom, and laundry doors take constant use, so hinges loosen, screws strip, and levers wear out. Hinges are re-anchored with proper backing, strikes are realigned, and worn levers or locksets are replaced so the door hangs true and latches cleanly again.
Can a rubbing or sticking door be fixed without replacing it?
Often, yes. Many rubbing or sticking doors are corrected by adjusting or shimming hinges, realigning the strike, easing the slab, or squaring the jamb. Replacement is usually only the better call when the slab is warped or damaged, or when the opening needs a cleaner finished result.
Can you repair several doors at once in a Gilbert home?
Yes. It’s common in Gilbert homes to have a handful of doors that stick, sag, won’t latch, or have tired hardware. Multiple doors and hardware sets are handled in one visit on a schedule that fits the household, so the whole house operates cleanly instead of one door at a time.
Are you licensed and insured, and is the work warrantied?
Yes. Retro Fit Installation LLC is a licensed Arizona finish carpenter, AZ ROC R-60 #346885, bonded and insured. Work is owner-performed by Devin Nelson and backed by a 2-year workmanship warranty on Retro Fit installation labor (excluding materials, manufacturer defects, customer-supplied products, movement, water, misuse, or work later modified by others).
How do I get a door repair estimate in Gilbert?
Call or text 928-699-2638, or use the contact form with a few photos and a note on what the door is doing. Devin reviews each request personally and responds with next steps.
Need a door repaired in Gilbert?
Send a couple of photos and a note on what the door is doing. Devin will review it and respond with next steps and an estimate.
Request a Free Estimate